Matest catalogue 2018

SECTION C | CONCRETE
319
ACCESSORIES AND SPARES TO COMPRESSION AND FLEXURAL TESTING MACHINES
PACKING SET
Comprising three elements, for piston/cylinder coupling
MODELS
C122 For compression machine 1200 kN capacity
C122-01 For compression machines 1300-1500 kN capacity
C122-02 For compression machine 2000 kN capacity
C122-03 For compression machine 3000 kN capacity
C122-04 For flexure machine 150 kN capacity, C090 serie
C122-06 For flexure machine 150kN capacity, C091, C093 serie
C122-07 For flexure machine 200 kN capacity, C090-06 and
C090-07 serie
C122-05 Packing set for the hand-operated pump of testing
machines
E161-15 For Cement testing machines mod. E151 to E161
E183-11 For Cement machines mod. E181, E183, piston 250kN
E183-12 For Cement machines mod. E181, E183, piston 15kN
C110-15
LOWER COMPRESSION PLATEN
C122...E183-12
Hardened and rectified, Ø 216x40 mm, complrte with distance piece
20 mm high to test cubes 100, 150 mm and cylinders up to
Ø 160x320 mm
Weight: kg 11.3 + kg 3
NEW
This simple and low cost solution is recommended for an easier
use of the High Stability Compression Testing Machines and the
compression machines equipped with lower platen Ø 287 mm to
test cube specimens 100 and 150 mm side and cylinders up to Ø
160x320 mm
It consists of replacing the heavy lower compression platen having
Ø 287 mm by 60 mm height (weight 30.3 kg) with a smaller platen
having only Ø 216 mm by 40 mm height (weight 11.3 kg), together
with the suitable 20 mm high distance piece.
C110-15
This test solution allows a much easier removal and positioning of
the lower compression platen when the distance pieces have to be
fitted in and out, based on the specimen size the user needs to test
(cube 100 or 150 mm or cylinder 150x300 mm or 160x320 mm
diameter).
This solution is not valid only when a cube specimen 200 mm side
has to be tested. In this case the lower compression platen 287 mm
diameter must be foreseen to cover the full surface of the 200 mm
cube specimen.
NEW
C089-02N with C110-15 light lower plate Ø 216 mm (weight 11.3 kg)
C089-02N with standard lower plate Ø 287 mm (weight 30.3 kg)