Matest catalogue 2018

466
SECTION S | SOIL
S058
NUCLEAR MOISTURE DENSITY GAUGE
STANDARDS: ASTM D6938, D2950, C1040 | AASHTO T310
This product is used to measure moisture density of the construction
material from surface to 300 mm of depth. This device can
measure and display wet density and dry density, percent moisture,
moisture content and other necessary engineering parameters
related to density and moisture content of materials.
Software features include self-test, special calibration, asphalt
thinlayer mode and built in diagnostics tests to help users identify
problems and solve them in the field.
Specifications:
- Density measurement range: 1120 to 2720 kg/m³
- Moisture measurement range: 0 to 640 kg/m³
- Precision at 2000 kg/m³, 150 mm - Depth: ± 3.5 kg/m³
- Moisture precision at 240 kg/m³: ± 4.42 kg/m³
Gauge dimensions: 580x310x220 mm
Weight: 14 kg approx.
ACCESSORIES for S058
S058-11
NUCLEAR GAUGE VALIDATOR AND CALIBRATION DEVICE
STANDARDS: ASTM D6938, D2950 | AASHTO T310
This lightweight block may be used in the field to check the calibration
accuracy of the gauge and re-calibrate all model gauges, if
necessary. The software for determination of calibration constant is
user friendly and communicates directly with the gauge for download
of constants. The block is constructed for the rugged construction
industry with 1/8” Aluminum exterior with powder coat paint
and it is internally lined with shielding and composite compound in
secured enclosure.
For calibration, the user requires a PC with Windows ® operating
system.
Dimensions: 480x460x300 mm
Weight: 38 kg approx.
S058
S060
NUCLEAR MOISTURE DENSITY GAUGE
STANDARDS: ASTM D6938, D2950, C1040 | AASHTO T310
It provides a rapid method of on-site determination of moisture
density content of soils, aggregates and asphaltic concrete.
The microprocessor displays all functions directly.
Wet and dry density, moisture percent, moisture content, percent
compaction for both soils and asphaltic concrete, void ratio and
percent air voids.
Surce is 300 mm with index rods for direct transmission depths in
50 mm increments. Stores up to 320 field tests, transferable to PC
or printer.
Gage dimensions: 400x220x140 mm
Shipping weight: 14 kg approx.
S058-12 SOFTWARE to be used with the validator for calibrations.
S058-11 S060