Matest catalogue 2018

SECTION S | SOIL
551
PRESSURE SYSTEM
S340
DIAL GAUGE UNITS 4 VALVES
TO MEASURE PRESSURE (0-1700 KPA)
4 inlet/outlet null displacement valves are supplied with the dial
gauge. Used to measure water pressure as cell pressure or pore
pressures. The dial gauge is set in a metallic support.
Pressure range: 0-1700 kPa.
Dimensions: 410x350x110 mm
Weight: 6 kg approx.
S342-01
2 WAYS PRESSURE PANEL
NEW
This pressure panel is designed to distribute the water pressure used
in soil laboratory applications, such as automatic triaxial systems.
The panel is constituted by two pressure lines fitted with high
accurate regulators and pressure valves.
Dimensions: 416x430x181 mm
Weight: 10 Kg approx.
S342-05
S345
SCREW PUMP
It has to be connected to the pressure dial gauge unit and it is used
to control water pressures by means of small screw rotations. It can
decrease or decrease pressures as required.
Weight: 3 kg approx.
S340
S342-01
S342-02
3 WAYS PRESSURE PANEL
Identical to the S342-02 but fitted with three pressure lines.
Dimensions: 460x430x181 mm
Weight: 13 Kg approx.
S342-05
NEW
S345
S348 S350-01
S342-02
S348
DISTRIBUTION UNIT
It is provided with 5 inlet/outlet valves with null variation of volume.
All valves are connected to an aluminium support. It is used to
deliver pressurized water to different lines.
Dimensions: 200x200x55 mm
Weight: 3 kg approx.
S350-01 Two-way distribution valve for air or water.
ACCESSORY
S342-05 DIGITAL GAUGE to be fitted on S342-01 and S342-02.
Resolution: 1 kPa
SPARES
S342-04 Pressure air regulator, 10 bar
S325 Nylon tube Ø 4x6 mm