Matest catalogue 2018

218
SECTION C | CONCRETE
LOAD MEASUREMENT SYSTEMS
A) GAUGES
The gauges are Bourdon tube type. They include max. load
pointer, zero adjustment and mirror face to avoid parallax errors.
Low pressure gauge is fully protected from overload by a pressure
control device.
(A)
B) CYBER-PLUS Evolution, EIGHT analog channels system, for the
acquisition, display and processing of test data, with software
and printout of results and certificates.
Resolution up to 500.000 divisions.
TOUCH-SCREEN COLOUR display, same as PC.
Technical details: see mod. C109N, p. 222...228
BB) DIGITEC, TWO analog channels system, for the acquisition,
display and processing of test data with software (accessory)
and printout of results and certificates.
Technical details: see mod: C108N, p. 219...221
B) C109N
BB) C108N
C) SERVO-PLUS Evolution, automatic servo-controlled system,
to provide fully automatic tests throughout all phases, with the
support of the Cyber-Plus Evolution electronic technology.
Technical details: see mod: C104N, p. 222...228
CC) AUTOTEC, automatic servo-controlled system, to provide fully
automatic tests throughout all phases, with the support of the
Digitec electronic technology
Technical details: see mod. C098N, p. 219...221
C) C104N
CALIBRATION AND
PRECISION
All testing machines are
calibrated with high accuracy
electronic instruments and are
guaranted in CLASS “1”
(max. error ≤ than ± 1%).
Also starting from 1% of the
full range.
A Calibration Certificate is supplied
along with the machine.
CC) C098N
C104-04
C104-04 NEW
CONSOLE, lined with
sound-proofing material
for noise reduction, new
design.