Matest catalogue 2018

282
SECTION C | CONCRETE
SERVO-STRAIN
SOFTWARE-FIRMWARE for the automatic servo-controlled management of the testing machine to measure:
LOAD OR STRENGTH
DISPLACEMENT
STRAIN
The servo-strain software/firmware can be applied ONLY to Matest servo-plus evolution testing machines.
The system is connected to displacement or strain transducers allowing to automatically perform the following tests:
- Deflection on fiber reinforced concrete beams (ASTM C1018, C1609 | EN 11039-03, 14487-1, 14488-3, 14651-05) see p. 305
- Punching of sprayed concrete plate with measurement of the absorbed energy (EN 10834, 14488-3, 14488-05) see p. 306
- Deformation and ductility on building materials, with C104-10N
- Lightweight Aggregates for concrete, mortar and grout (EN 13055-1 method 1) by using the suitable device mod. A081-01 described at p. 45
- Deflection on fiber reinforced concrete beams (ASTM C1018, C1609 | EN 11039-03, 14487-1, 14488-3, 14651-05) see p. 305
- Punching of sprayed concrete plate with measurement of the absorbed energy (EN 10834, 14488-3, 14488-05) see p. 306
- Research tests
The applied load is automatically controlled by the servo-plus evolution machine.
The displacement of the piston or the strain/deformation of the sample are controlled by the servo-strain software, through a linear strain gage
transducer (accessory), calculating values such as deflection, energy absorption, ductility.
TECHNICAL FEATURES
Same to servo-plus evolution model C104N (p. 224), and in addition:
- Real time Graphical/Numerical display of all test data (load, strain, displacement, energy absorption, deflection, ductility etc.)
- Printing of test results and certificate on the onboard printer, or on a laser printer (accessories) directly connected to the machine via USB port.
- Personalized management of the archive exportable through pendrive.
- Possibility to connect up to 3 test frames
- Eight analog channels to connect load cells or pressure transducers with strain gage technology, linear displacement/deformation transducers
and with strain gage technology.
C104-10N
Set up of customized compression test
C104-10N
Exemple of test result
C104-10N Test report
C109-15N Calculation set up
C104-10N Test graph