Matest catalogue 2018

220
SECTION C | CONCRETE
SPECIFICATIONS DIGITEC | AUTOTEC
- 2 analogue-digital channels accepting sensors, transducers
or load cells at 2 mV/V, allows the connection to two different
compression/flexure frames.
- Simple and immediate parameters set up and test execution,
menu driven interface.
- Rapid approaching, touching on and breaking of the specimen
under direct pump control (Autotec C098N)
- Automatic control of the pace rate (Autotec C098N)
- Continue load display.
- Breaking load detection.
- Automatic elaboration of the specific resistance value.
- Permanent file up to 1000 tests and file of 100 different types of
specimens.
- Graphic display with high resolution: 192x64 pixels.
- Selectable measuring force: kN, lb
- Languages: English, French, German, Spanish, Italian, Polish,
Czech, Turkish.
- Class 1 starting from 10% of maximum value,
on request from 1% of maximum value.
- ± 0.5% load accuracy.
TECHNICAL STRUCTURE
- Acquisition and data processing system at 24 bit, effective resolution:
17 bit.
- Operator interface composed by 5 multi-functions pushbuttons;
function ico ns shown on the display.
- Different programmable safety devices for the machine or the
specimen as the possibility to introduce a percentage of the maximum
value reached during the text execution, thermal protection
of the motor and different other settable alarms.
- The firmware contains a memory of the most used specimens:
area, weight, specific weight.
- Possibility of personalization for special sized samples.
- RS232 interface: it allows the data transfer during the test or
the test results directly to PC (via Microsoft Hyperterminal) or the
remote control of the system by means of the UTM2 software
(accessory).
Menu
The display shows date and time, currently applied
load and single load, latest effected tests, pace rate
control, rapid commands functions, configuration in
use, analogue channel and activated alarm.
Test setup
Test execution with pace rate controller
Max load alarm setting
Channel configuration/calibration
Functions icons (test selection, file, alarms visualisation)