Matest catalogue 2018

SECTION A | AGGREGATES - ROCKS
47
A079
DEVAL TESTING MACHINE
STANDARDS: NF P18-577 | ASTM D2-33
Used to determine the quality of aggregates to abrasion both by
dry and wet procedure. The machine essentially comprises a steel
frame on which two cylinders are mounted. The machine is supplied
complete with a separate control panel fitted with a digital automatic
revolution counter and two collecting pans.
It cannot be sold on CE markets without security cabinet
(see mod. A079-02).
Power supply: 230V 50Hz 1ph 750W
Dimensions: 1500x520x1280 mm
Weight: 140 kg approx.
A079-02
DEVAL TESTING MACHINE
Same as mod. A079, but equipped with a security cabinet, manufactured
from sheet steel, lined with sound-proofing material for
noise reduction, conforming to CE Safety Directive.
When opening the cabinet door during Deval working, a microswitch
automatically stops the machine.
A079
Dimensions: 1650x650x1400 mm
Weight: 180 kg approx.
A079-02
AGGREGATE IMPACT VALUE APPARATUS
STANDARDS: BS 812 | NF P18-574
Used to determine the impact value of aggregates and select them
for a given application. The machine has a trip-action hammer
release, blow counter device and a built-in operator safety device.
Manufactured in heavy duty form with hardened steel surfaces
for minimum wear. The complete assembly is cadmium plated for
corrosion protection.
Dimensions: 445x300x880 mm
Weight: 60 kg approx.
A087
A087
SCRATCH HARDNESS TEST APPARATUS
This device is used to determine the quantity of soft particles in
coarse aggregates.
The apparatus consists of a metal sliding rod ended with a round
point of 1.6 mm diameter, mounted in a suitable frame.
A load of 8.9 ± 0.4 N is applied to the test sample.
Dimensions: 160x200x350 mm
Weight: 8 kg approx.
A080 KIT
THE APPARATUS IS AVAILABLE IN TWO VERSIONS:
one meeting BS812 Standard
one meeting NF P18-574 Standard
A080KIT
AGGREGATE IMPACT VALUE APPARATUS. BS 812
Consisting of:
A080-04 TEST FRAME ASSEMBLY
A080-02 CYLINDRICAL MOULD, Ø 102x50 mm, cylindrical
measure Ø 75x50 mm, tamping rod.
A080-01KIT
AGGREGATE IMPACT VALUE APPARATUS. NF P18-574
Consisting of:
A080-04 TEST FRAME ASSEMBLY
A080-03 CYLINDRICAL MOULD, Ø 102x52 mm.