Matest catalogue 2018

More documents

Recommendations

Info

406 SECTION E | CEMENT - MORTAR E142 DIGITAL PULL-OFF (BOND) STRENGTH TESTER. CAPACITY: 16 KN STANDARDS: EN 1542, EN 1348, EN 1015-12, EN 13687-2, EN 13963, EN 14496 / NF P18-858 / BS 1881:207 This dynamometer measures the adhesive force and the tensile strength of two layers of materials (concrete, facing plasters, mortars, building plasters, lime etc.) and is particularly suitable for applications concerning testing repairs of any structure where the bond strength between two layers is an essential factor. Compact, light, for use in any location, this Pull-Off Tester is fitted with a load cell and high resolution large digital display unit; it is therefore suitable for measurements from low loads up to 16 kN, granting a wide working range and ideal for a large number of applications and materials. The direct tensile force is applied by rotating the hand wheel. The three feet of the unit can be fixed in the large position (overall dimensions 176 mm diameter, see drawing “A”) with very stable bearing, or in the compact position (overall dimensions 92.5 mm diameter, see drawing “B”), to perform tests in narrow spaces, or for specimens close one to the other. Specifications: - Load capacity: 16 kN - Resolution: 10 N - Working range: 0.25 to 16 kN - Accuracy and repeatability: better than ± 1% - Complete with traceable calibration certificate - Battery operated - Serial port for PC connection - Hand wheel rounds: 60 with mechanical round/counter - Graphic indication of the applied load rate - Seat ball assuring axial/central load application Supplied complete with carrying case, but without accessories to perform the test, which have to be ordered separately. To perform the test a common electric drill is required. Dimensions: 410x210x270 mm Weight: 5.5 kg approx. E142-01 DIGITAL PULL-OFF TESTER CAPACITY: 5 KN Identical to mod. E142 but with load cell and digital display range 0-5 kN for more accurate measurements on low strength values E142 with feet in large position E142 in aluminium case Drawing A
SECTION E | CEMENT - MORTAR 407 Drawing B ACCESSORIES E142-10 SOFTWARE complete with connection cable to download test results to the PC E143 ADHESION TEST ALUMINIUM DISC 20 mm Ø by 21 mm thick (n° 10 pieces) E143-01 ADHESION TEST ALUMINIUM DISC 50 mm Ø by 31 mm thick (n° 10 pieces) E143-10 ADHESION TEST STAINLESS STEEL DISC 50 mm Ø by 21 mm thick (n° 10 pieces) It conforms to EN 1015-12 Specification. E143-13 ADHESION TEST ALUMINIUM DISC, square, 50x50 mm, 21 mm thick (n° 10 pieces) Standard: EN 1348 E143-11 CYLINDRICAL RING, having truncated cone shape, inside Ø 50 mm Standard: EN 1015-12 E143-02 DRILL BIT WITH CENTERING BIT, 20 mm diameter, for the preparation of the test surface. E143-03 DRILL BIT WITH CENTERING BIT, 50 mm diameter, for the preparation of the test surface. E143-12 ACRYLIC ADHESIVE GLUE, 300 ml. cartridge, complete with small pump and nozzles. SPARE E142 with feet in compact position E143-09 Tie rod with spheric head for Disc/Dynamometer coupling. E143-11 E143-10 E143-03 E143-01 E143-13 E143-12 E143-09 E143-02 E143
Page 1 and 2:
CATALOGUE 2018 10th Edition
Page 3 and 4:
...Because of our ability to consta
Page 5 and 6:
THE LATEST OUTCOMES OF OUR RESEARCH
Page 7 and 8:
#GLOBALPRESENCE Strong participatio
Page 9 and 10:
A 32 YEARS JOURNEY INTO MANUFACTURI
Page 11 and 12:
Silent. Stilysh. Standout. An inver
Page 13 and 14:
EMBRACING A CULTURE OF TESTING.
Page 15 and 16:
Triaxlab Automated System Cyclic Tr
Page 17 and 18:
INDEX SECTION AA | Software Utm2 18
Page 19:
SECTION AA | SOFTWARE UTM2 19 Gener
Page 22 and 23:
22 SECTION A | AGGREGATES - ROCKS G
Page 24 and 25:
24 SECTION A | AGGREGATES - ROCKS H
Page 26 and 27:
26 SECTION A | AGGREGATES - ROCKS C
Page 28 and 29:
Page 30 and 31:
30 SECTION A | AGGREGATES - ROCKS A
Page 32 and 33:
32 SECTION A | AGGREGATES - ROCKS B
Page 34 and 35:
34 SECTION A | AGGREGATES - ROCKS T
Page 36 and 37:
36 SECTION A | AGGREGATES - ROCKS W
Page 38 and 39:
Page 40 and 41:
40 SECTION A | AGGREGATES - ROCKS E
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
50 SECTION A | AGGREGATES - ROCKS S
Page 52 and 53:
52 SECTION A | AGGREGATES - ROCKS S
Page 54 and 55:
54 SECTION A | AGGREGATES - ROCKS D
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
62 SECTION A | AGGREGATES - ROCKS D
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
70 SECTION A | AGGREGATES - ROCKS T
Page 72 and 73:
Page 75 and 76:
SECTION B ASPHALT | BITUMEN | PAVET
Page 77 and 78:
SECTION B | ASPHALT 77 The unit con
Page 79 and 80:
SECTION B | ASPHALT 79 B005 BITUMEN
Page 81 and 82:
SECTION B | ASPHALT 81 B014 CONTINU
Page 83 and 84:
SECTION B | ASPHALT 83 B018 BINDER
Page 85 and 86:
SECTION B | ASPHALT 85 B067A AUTORI
Page 87 and 88:
SECTION B | ASPHALT 87 INDENTATION
Page 89 and 90:
SECTION B | ASPHALT 89 B114 ASPHALT
Page 91 and 92:
SECTION B | ASPHALT 91 MIXERS 20 AN
Page 93 and 94:
SECTION B | ASPHALT 93 The Pavemix
Page 95 and 96:
SECTION B | ASPHALT 95 B033N AUTOMA
Page 97 and 98:
SECTION B | ASPHALT 97 B030 KIT MAR
Page 99 and 100:
SECTION B | ASPHALT 99 GYROTRONIC -
Page 101 and 102:
SECTION B | ASPHALT 101 GYROTRONIC
Page 103 and 104:
SECTION B | ASPHALT 103 AVAILABLE M
Page 105 and 106:
SECTION B | ASPHALT 105 B041-28 GAM
Page 107 and 108:
SECTION B | ASPHALT 107 B039 ARC AS
Page 109 and 110:
SECTION B | ASPHALT 109 ACCESSORIES
Page 111 and 112:
SECTION B | ASPHALT 111 TECHNICAL S
Page 113 and 114:
SECTION B | ASPHALT 113 HARDWARE Da
Page 115 and 116:
SECTION B | ASPHALT 115 B038A SMART
Page 117 and 118:
SECTION B | ASPHALT 117 TABLE OF AC
Page 119 and 120:
SECTION B | ASPHALT 119 THE NEXT GE
Page 121 and 122:
SECTION B | ASPHALT 121 B042 KIT MA
Page 123 and 124:
SECTION B | ASPHALT 123 Note: The D
Page 125 and 126:
SECTION B | ASPHALT 125 MULTIFUNCTI
Page 127 and 128:
SECTION B | ASPHALT 127 SPECIFIC AP
Page 129 and 130:
SECTION B | ASPHALT 129 S205N UNITR
Page 131 and 132:
SECTION B | ASPHALT 131 SPECIFIC AP
Page 133 and 134:
SECTION B | ASPHALT 133 B044N-SET i
Page 135 and 136:
SECTION B | ASPHALT 135 B052 DIGITA
Page 137 and 138:
Page 139 and 140:
SECTION B | BITUMEN 139 TECHNICAL S
Page 141 and 142:
SECTION B | BITUMEN 141 B056-01 KIT
Page 143 and 144:
SECTION B | BITUMEN 143 B063-10 PAR
Page 145 and 146:
SECTION B | BITUMEN 145 B055-10 DUC
Page 147 and 148:
SECTION B | BITUMEN 147 B075 WATER
Page 149 and 150:
SECTION B | BITUMEN 149 B064 KIT RO
Page 151 and 152:
SECTION B | BITUMEN 151 B070N1 SOFT
Page 153 and 154:
SECTION B | BITUMEN 153 B080 ENGLER
Page 155 and 156:
SECTION B | BITUMEN 155 B092 KIT TA
Page 157 and 158:
SECTION B | BITUMEN 157 B085-07N DS
Page 159 and 160:
SECTION B | BITUMEN 159 B091M-01 VD
Page 161 and 162:
SECTION B | BITUMEN 161 B085-29 BAT
Page 163 and 164:
SECTION B | BITUMEN 163 KINEMATIC V
Page 165 and 166:
SECTION B | BITUMEN 165 B098N TRAVE
Page 167 and 168:
SECTION B | BITUMEN 167 B103-10 BEA
Page 169 and 170:
Page 171 and 172:
SECTION B | PAVEMENT TECHNOLOGY 171
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213:
Page 216 and 217:
216 SECTION C | CONCRETE COMPRESSIO
Page 218 and 219:
218 SECTION C | CONCRETE LOAD MEASU
Page 220 and 221:
220 SECTION C | CONCRETE SPECIFICAT
Page 222 and 223:
222 SECTION C | CONCRETE ULTIMATE D
Page 224 and 225:
224 SECTION C | CONCRETE C109N CYBE
Page 226 and 227:
226 SECTION C | CONCRETE Internet d
Page 228 and 229:
228 SECTION C | CONCRETE MODELS C10
Page 230 and 231:
Page 232 and 233:
232 SECTION C | CONCRETE ACCESSORIE
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
282 SECTION C | CONCRETE SERVO-STRA
Page 284 and 285:
284 SECTION C | CONCRETE C125N DETE
Page 286 and 287:
286 SECTION C | CONCRETE DETERMINAT
Page 288 and 289:
288 SECTION C | CONCRETE FLEXURE TE
Page 290 and 291:
290 SECTION C | CONCRETE FLEXURAL T
Page 292 and 293:
292 SECTION C | CONCRETE FLEXURAL T
Page 294 and 295:
294 SECTION C | CONCRETE FLEXURAL F
Page 296 and 297:
296 SECTION C | CONCRETE C095N FLEX
Page 298 and 299:
298 SECTION C | CONCRETE C095N SPEC
Page 300 and 301:
300 SECTION C | CONCRETE C096N HIGH
Page 302 and 303:
302 SECTION C | CONCRETE C096N SPEC
Page 304 and 305:
304 SECTION C | CONCRETE FIBER REIN
Page 306 and 307:
306 SECTION C | CONCRETE ENERGY ABS
Page 308 and 309:
308 SECTION C | CONCRETE UNIVERSAL
Page 310 and 311:
310 SECTION C | CONCRETE UPGRADING
Page 312 and 313:
312 SECTION C | CONCRETE C104-03N S
Page 314 and 315:
2 SECTION C | CONCRETE C104-03P KIT
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
322 SECTION C | CONCRETE S206N UNIT
Page 326 and 327:
324 SECTION C | CONCRETE ABRASION M
Page 328 and 329:
326 SECTION C | CONCRETE C138N UNIV
Page 330 and 331:
328 SECTION C | CONCRETE TURBO FORC
Page 332 and 333:
330 SECTION C | CONCRETE TESTING FR
Page 334 and 335:
332 SECTION C | CONCRETE SLUMP CONE
Page 336 and 337:
334 SECTION C | CONCRETE C187 K-SLU
Page 338 and 339:
336 SECTION C | CONCRETE C195 AIR E
Page 340 and 341:
338 SECTION C | CONCRETE CONCRETE F
Page 342 and 343:
340 SECTION C | CONCRETE PLASTIC CU
Page 344 and 345:
342 SECTION C | CONCRETE STEEL CUBE
Page 346 and 347:
344 SECTION C | CONCRETE VIBRATING
Page 348 and 349:
346 SECTION C | CONCRETE CURING TAN
Page 350 and 351:
348 SECTION C | CONCRETE CLIMATIC C
Page 352 and 353:
350 SECTION C | CONCRETE UNBONDED C
Page 354 and 355:
352 SECTION C | CONCRETE C299 AUTOM
Page 356 and 357:
354 SECTION C | CONCRETE C377 MICRO
Page 358 and 359: 356 SECTION C | CONCRETE CORE DRILL
Page 360 and 361: 358 SECTION C | CONCRETE C348T SPEC
Page 362 and 363: 360 SECTION C | CONCRETE FLAT JACKS
Page 364 and 365: 362 SECTION C | CONCRETE TESTING OF
Page 366 and 367: 364 SECTION C | CONCRETE C374 MOIST
Page 368 and 369: 366 SECTION C | CONCRETE RAPID CHLO
Page 370 and 371: 368 SECTION C | CONCRETE REBOUND CO
Page 372 and 373: 370 SECTION C | CONCRETE C393 RESON
Page 374 and 375: 372 SECTION C | CONCRETE C372M ULTR
Page 376 and 377: 374 SECTION C | CONCRETE COVER TO R
Page 378 and 379: 376 SECTION C | CONCRETE C410 WINDS
Page 380 and 381: 378 SECTION C | CONCRETE DEFLECTOME
Page 382 and 383: 380 SECTION C | CONCRETE WATER IMPE
Page 385 and 386: SECTION E CEMENT - MORTAR The raw m
Page 387 and 388: SECTION E | CEMENT - MORTAR 385 E01
Page 393 and 394: SECTION E | CEMENT - MORTAR 391 PRO
Page 403 and 404: SECTION E | CEMENT - MORTAR 401 FLO
Page 407: SECTION E | CEMENT - MORTAR 405 E09
Page 415 and 416: SECTION E | CEMENT - MORTAR 413 C10
Page 417 and 418: SECTION E | CEMENT - MORTAR 415 MAI
Page 419 and 420: SECTION E | CEMENT - MORTAR 417 S20
Page 421 and 422: SECTION E | CEMENT - MORTAR 419 MAC
Page 423 and 424: SECTION E | CEMENT - MORTAR 421 H00
Page 425 and 426: SECTION E | CEMENT - MORTAR 423 COM
Page 427 and 428: SECTION E | CEMENT - MORTAR 425 H00
Page 429 and 430: SECTION E | CEMENT - MORTAR 427 ACC
Page 431 and 432: SECTION E | CEMENT - MORTAR 429 COM
Page 433: SECTION E | CEMENT - MORTAR 431 The
Page 436 and 437: 434 SECTION H | STEEL UNIVERSAL AUT
Page 438 and 439: 436 SECTION H | STEEL CONTROL SYSTE
Page 440 and 441: 438 SECTION H | STEEL H001BS with a
Page 442 and 443: 440 SECTION H | STEEL H003N UNIVERS
Page 444 and 445: 442 SECTION H | STEEL SERVO-CONTROL
Page 446 and 447: 444 SECTION H | STEEL ACCESSORIES F
Page 448 and 449: 446 SECTION H | STEEL UNIVERSAL TEN
Page 450 and 451: 448 SECTION H | STEEL ACCESSORIES f
Page 452 and 453: 450 SECTION H | STEEL H017 UNIVERSA
Page 454 and 455: 452 SECTION H | STEEL S205-05N UNIT
Page 456 and 457: 454 SECTION H | STEEL H065N COLD BE
Page 458 and 459:
456 SECTION H | STEEL PENDULUM IMPA
Page 461 and 462:
SECTION S SOIL For the implementati
Page 463 and 464:
SECTION S | SOIL 461 S051-01 S052KI
Page 465 and 466:
SECTION S | SOIL 463 SURFACE SOIL S
Page 467 and 468:
SECTION S | SOIL 465 S086 LOAD RING
Page 469 and 470:
SECTION S | SOIL 467 S059-10 ELECTR
Page 471 and 472:
SECTION S | SOIL 469 S132N COLOR ST
Page 473 and 474:
SECTION S | SOIL 471 S118 SOIL DIE
Page 475 and 476:
SECTION S | SOIL 473 A028 UNIVERSAL
Page 477 and 478:
SECTION S | SOIL 475 S143 KIT PARTI
Page 479 and 480:
SECTION S | SOIL 477 S159 KIT SAND
Page 481 and 482:
SECTION S | SOIL 479 SPECIFIC GRAVI
Page 483 and 484:
SECTION S | SOIL 481 S175 SHRINKAGE
Page 485 and 486:
SECTION S | SOIL 483 B057-02 S165-0
Page 487 and 488:
SECTION S | SOIL 485 PROCTOR RAMMER
Page 489 and 490:
SECTION S | SOIL 487 AUTOMATIC PROC
Page 491 and 492:
SECTION S | SOIL 489 Description St
Page 493 and 494:
SECTION S | SOIL 491 STRENGTH OF ST
Page 495 and 496:
SECTION S | SOIL 493 CALIFORNIA BEA
Page 497 and 498:
SECTION S | SOIL 495 MULTIFUNCTION
Page 499 and 500:
SECTION S | SOIL 497 S215A with CBR
Page 501 and 502:
SECTION S | SOIL 499 B044N-SET is c
Page 503 and 504:
SECTION S | SOIL 501 FIRMWARE Elect
Page 505 and 506:
SECTION S | SOIL 503 S205N | S205-0
Page 507 and 508:
SECTION S | SOIL 505 AUTO SCB SEMI-
Page 509 and 510:
SECTION S | SOIL 507 FLEXURAL TEST
Page 511 and 512:
SECTION S | SOIL 509 FIRMWARE Elect
Page 513 and 514:
SECTION S | SOIL 511 S206N UNITRONI
Page 515 and 516:
SECTION S | SOIL 513 PUNCHING TEST
Page 517 and 518:
SECTION S | SOIL 515 S223 KIT PLATE
Page 519 and 520:
SECTION S | SOIL 517 S226 KIT PLATE
Page 521 and 522:
SECTION S | SOIL 519 S224-02 KIT DI
Page 523 and 524:
SECTION S | SOIL 521 S228N DYNAMIC
Page 525 and 526:
SECTION S | SOIL 523 S230 KIT ASTM
Page 527 and 528:
SECTION S | SOIL 525 BS SAND REPLAC
Page 529 and 530:
SECTION S | SOIL 527 S248 PERMEAMET
Page 531 and 532:
SECTION S | SOIL 529 CONSOLIDATION
Page 533 and 534:
SECTION S | SOIL 531 S260-05N SOFTW
Page 535 and 536:
SECTION S | SOIL 533 S262N EDOTRONI
Page 537 and 538:
SECTION S | SOIL 535 MODULARITY TES
Page 539 and 540:
SECTION S | SOIL 537 THE DIRECT/RES
Page 541 and 542:
SECTION S | SOIL 539 S277-40N SOFTW
Page 543 and 544:
SECTION S | SOIL 541 FIRMWARE Simil
Page 545 and 546:
SECTION S | SOIL 543 TRIAXIAL TESTS
Page 547 and 548:
SECTION S | SOIL 545 S301-02 TRIAXI
Page 549 and 550:
SECTION S | SOIL 547 ACCESSORIES RU
Page 551 and 552:
SECTION S | SOIL 549 MEASURE OF THE
Page 553 and 554:
SECTION S | SOIL 551 PRESSURE SYSTE
Page 555 and 556:
SECTION S | SOIL 553 MEASURE OF VOL
Page 557 and 558:
SECTION S | SOIL 555 RECOMMENDED TY
Page 559 and 560:
SECTION S | SOIL 557 RECOMMENDED TY
Page 561 and 562:
SECTION S | SOIL 559 AUTOMATIC DATA
Page 563 and 564:
SECTION S | SOIL 561 TRIAXLAB AUTOM
Page 565 and 566:
SECTION S | SOIL 563 TRIAXLAB AUTOM
Page 567 and 568:
SECTION S | SOIL 565 S349 PRESSUREM
Page 569 and 570:
SECTION S | SOIL 567 CYCLIC TRIAXLA
Page 571 and 572:
SECTION S | SOIL 569 CYCLIC TRIAXLA
Page 573 and 574:
SECTION S | SOIL 571 TESTLAB, USER
Page 575 and 576:
SECTION S | SOIL 573 LOAD PROVING R
Page 577:
SECTION S | SOIL 575 OUR CLIENTS AR
Page 580 and 581:
578 SECTION V | GENERAL EQUIPMENT M
Page 582 and 583:
580 SECTION V | GENERAL EQUIPMENT E
Page 584 and 585:
582 SECTION V | GENERAL EQUIPMENT V
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
588 SECTION V | GENERAL EQUIPMENT P
Page 592 and 593:
590 SECTION V | GENERAL EQUIPMENT D
Page 594 and 595:
Page 596 and 597:
Page 598 and 599:
596 SECTION V | GENERAL EQUIPMENT H
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
602 INDEX | STANDARDS INDEX ANALYTI
Page 606 and 607:
604 INDEX | ANALYTICAL Beakers, pyr
Page 608 and 609:
606 INDEX | ANALYTICAL Deflection o
Page 610 and 611:
608 INDEX | ANALYTICAL Guards, safe
Page 612 and 613:
610 INDEX | ANALYTICAL Pan type mix
Page 614 and 615:
612 INDEX | ANALYTICAL Scoop stainl
Page 616 and 617:
614 INDEX | ANALYTICAL Unitronic 50
Page 618 and 619:
616 INDEX | STANDARDS API Page API
Page 620 and 621:
618 INDEX | STANDARDS BS Page BS (D
Page 622 and 623:
620 INDEX | STANDARDS EN 12697-24 A
Page 624 and 625:
622 INDEX | STANDARDS NF P15-451 50
Page 626 and 627:
624 INDEX | PRODUCT CODE A Page A00
Page 628 and 629:
626 INDEX | PRODUCT CODE B033-04 95
Page 630 and 631:
628 INDEX | PRODUCT CODE B225-09, B
Page 632 and 633:
630 INDEX | PRODUCT CODE C130N 287
Page 634 and 635:
632 INDEX | PRODUCT CODE E044-48N 3
Page 636 and 637:
634 INDEX | PRODUCT CODE S157 KIT 5
Page 638 and 639:
636 INDEX | PRODUCT CODE S334-11, S
Page 640:
638 INDEX | PRODUCT CODE V178-03 59
show all

Matest catalogue 2018

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?