Matest catalogue 2018

450
SECTION H | STEEL
H017
UNIVERSAL EDUCATIONAL TESTING MACHINE CAPACITY 20 KN
The machine has been designed to measure strength of metallic
materials and study the various reactions they undergo when subject
to different stresses, verifying the same with the following tests:
- Tensile test
- Shear test
- Compression test
- Flexural test
- Brinell hardness
This machine is primarily for educational purposes
and intended for the use in higher educational
institutes or universities and allows students of material
science to have a hands-on approach to applications so
far studied at a theoretic level only.
NEW
Components of the machine:
- 30 kN (160 bar) manometer
- 50 mm full scale analog dial indicator
- 250 bar pressure transducer
- 50 mm travel displacement transducer
- 8-channel digital indicator
Power supply: 230V 1ph 50-60Hz 70W
Dimensions: 600x600x850 mm
Weight: 60 kg
H017
ACCESSORIES THAT CAN BE USED IN THE UPPER CHAMBER OF THE MACHINE
H017-05
TENSILE TEST
The equipment allows to perform tensile tests on steel samples
up to failure and serves to evaluate stress-strain diagrams of the
material comprising the sample and mainly to evaluate the following
parameters:
- Yield strength
- Proportionality limit
- Failure strength
- Elastic modulus
- Ultimate strength
The accessory includes: tensile heads for round samples and tensile
heads for flat samples.
H017-05