WRF ARW User's Guide - MMM - UCAR

WPS
Output from the ungrib program is always written in a simple binary format (either
‘WPS’, ‘SI’, or ‘MM5’), so software for viewing NetCDF files will almost certainly be of
no use. However, an NCAR Graphics-based utility, plotfmt, is supplied with the WPS
source code. This utility produces contour plots of the fields found in an intermediateformat
file. If the NCAR Graphics libraries are properly installed, the plotfmt program is
automatically compiled, along with other utility programs, when WPS is built.
WPS Utility Programs
Besides the three main WPS programs – geogrid, ungrib, and metgrid – there are a
number of utility programs that come with the WPS, and which are compiled in the util
directory. These utilities may be used to examine data files, visualize the location of
nested domains, compute pressure fields, and compute average surface temperature
fields.
A. avg_tsfc.exe
The avg_tsfc.exe program computes a daily mean surface temperature given input files in
the intermediate format. Based on the range of dates specified in the "share" namelist
section of the namelist.wps file, and also considering the interval between intermediate
files, avg_tsfc.exe will use as many complete days' worth of data as possible in
computing the average, beginning at the starting date specified in the namelist. If a
complete day's worth of data is not available, no output file will be written, and the
program will halt as soon as this can be determined. Similarly, any intermediate files for
dates that cannot be used as part of a complete 24-hour period are ignored; for example,
if there are five intermediate files available at a six-hour interval, the last file would be
ignored. The computed average field is written to a new file named TAVGSFC using the
same intermediate format version as the input files. This daily mean surface temperature
field can then be ingested by metgrid by specifying 'TAVGSFC' for the constants_name
variable in the "metgrid" namelist section.
B. mod_levs.exe
The mod_levs.exe program is used to remove levels of data from intermediate format
files. The levels which are to be kept are specified in new namelist record in the
namelist.wps file:
&mod_levs
press_pa = 201300 , 200100 , 100000 ,
95000 , 90000 ,
85000 , 80000 ,
75000 , 70000 ,
65000 , 60000 ,
55000 , 50000 ,
45000 , 40000 ,
35000 , 30000 ,
25000 , 20000 ,
WRF-ARW V3: User’s Guide 3-27