DOC-20230111-WA0038.

UNDERCARRIAGE / Track Adjuster
CAUTION: Plate (ST 4036) weight: 34 kg
(75 lb)
4. Install plate (ST 4036) on to special tool (ST 4920)
so that plate (ST 4036) overlies the track adjuster.
Plate (ST 4036)
Track Adjuster
ST 4920
5. Operate the oil jack to jack up the cradle by the
specified amount 60 mm (2.4 in).
60 mm= (Free length: 327 mm) - (Set length: 267
mm)
Cradle
W105-03-04-011
Oil Jack
W105-03-04-013
6. Tighten the nuts onto plate (ST 4036) to secure
the track adjuster.
Operate the oil jack to compress the track
adjuster approximately 10 mm (0.4 in) until a
clearance is observed between washer (11) and
nut (12).
: 46 mm
Nut
Plate
(ST 4036)
W105-03-04-012
12
1
14
7. Remove plug (14) from nut (12) to remove the nut
from cylinder (1).
:5 mm
: 60 mm
W105-03-04-014
W3-4-5