DOC-20230111-WA0038.

FRONT ATTACHMENT / Front Attachment
CAUTION: Boom cylinder weight: 92 kg
(205 Ib)
4. While lifting the boom cylinder by crane, start the
engine and extend the boom cylinder rod to align
the rod connecting pin hole.
5. Install thrust plates (4) on both sides of the boom
cylinder rod ends to adjust the clearances on both
sides within 1.5 mm (0.06 in).
W102-04-01-011
3
CAUTION: Prevent personal injury. Metal
debris may fly when a hammer is used to
install pins. Be sure to wear necessary
protections, such as goggles, hard hat, etc.
IMPORTANT: Take care not to damage pin (1).
6. Drive pin (1) in with a hammer and a bar to install
boom cylinder.
1
1
2
2, 3
4
W152-04-01-001
7. Install stopper pin (3) and ring (2) to the boom.
IMPORTANT: After completing work, check hydraulic
oil level. Fully stroke each
cylinder several times to bleed any
air remaining in the circuit while
checking each hose connectors for
any oil leackage.
W1CC-04-01-001
W4-1-5