DOC-20230111-WA0038.

FRONT ATTACHMENT / Cylinder
Install Blade Cylinder
CAUTION: Blade cylinder (3) weight: 51 kg
(112 Ib)
1. While slinging blade cylinder (3) by crane, align
the pin (5) holes on the tube and blade (7), rod
and track frame.
Insert thrust plate (4). Drive pin (5) (2 used) in with
a bar and a hammer. Secure the pins with bolts
(6) (2 used).
: 24 mm
: 210 N⋅m (21.5 kgf⋅m, 155 Ibf⋅ft)
6
5
4
1
2
3
4
2. Reconnect hoses (2 used) to blade cylinder (3).
: 22 mm
: 39 N⋅m (3 kgf⋅m, 21.5 Ibf⋅ft)
: 27 mm
: 93 N⋅m (9.5 kgf⋅m, 69 Ibf⋅ft)
3. Install cover (2) to blade cylinder (3), then secure
it with bolts (1) (2 used).
: 19 mm
: 90 N⋅m (9.2 kgf⋅m, 66 Ibf⋅ft)
7
6
5
W197-04-02-001
IMPORTANT: After completing work, fully stroke
each cylinder several times to bleed
any air remaining in the circuit.
W4-2-13