DOC-20230111-WA0038.

FRONT ATTACHMENT / Front Attachment
Removal
1. Remove ring (2) and stopper pin (3) on pin (1)
from the boom.
1
2, 3
W1CC-04-01-001
CAUTION: Boom cylinder weight: 92 kg (205 Ib)
Prevent personal injury. Metal
debris may fly when a hammer is
used to remove pins. Be sure to
wear necessary protection, such
as goggles, hardhat, etc.
2. Hoist the boom cylinder to take up slack of the
wire rope. Drive pin (1) out with a bar and a
hammer. Remove the boom cylinder rod side from
the boom with thrust plates (4) (2 used) coming
off together.
W102-04-01-011
3
1
2
4
W152-04-01-001
IMPORTANT: Boom cylinder rod has a grease fitting.
Lay boom cylinder on a support
so that the grease fitting does not
come in contact with the support.
3. Bind cylinder rod on cylinder tube with wire so that
cylinder rod is not extended. Lay boom cylinder on
a support by crane.
Wire
W554-02-03-007
W4-1-2