DOC-20230111-WA0038.

UNDERCARRIAGE / Track
Installation
1. Jack up the machine. Put the track under the
lower roller so that the sprocket teeth mesh with
the end of the track. Be sure to position the track
in correct direction as illustrated.
Idler Side
Sprocket Side
W105-03-07-013
2. Lift the track, and place it on sprocket (8).
8
W105-03-07-014
3. With the machine jacked up, operate the travel
lever for the track being wound side in forward
direction slowly. Turn travel device (9) while
installing the track.
9
W105-03-07-015
4. Turn the sprocket until the end of track (5) comes
on front idler (4). Lower the machine and place a
wooden block as illustrated.
4
5
W105-03-07-016
Wooden Block
W3-7-4