DOC-20230111-WA0038.

UPPERSTRUCTURE / Cab
Install rear glass as follows
1. Align rear glass (1) with the mounting position at
the rear of cab.
2. Secure the glass with screws (3) (2 used), washers
(4) (4 used) and nuts (5) (2 used) for hinges
(2) (2 used) temporarily.
3
7
3. Secure the glass with screws (7), washers (8) and
nuts (9) for catch handle (6) temporarily.
2
4. Tighten screws (3) (2 used) and screw (7) after
leveling.
1
6
5. Adjust glass positions on the cab at both right and
left with screw (10) of hinge (2).
IMPORTANT: Rear glass is arched-fringed type. If
this glass needs to be replaced, contact
with the nearest HITACHI Office
to replace it as a unit.
5
4
8
9
10 2 3
4
6 7
8
1 5 9
W1SE-02-01-046
W2-1-18