DOC-20230111-WA0038.

FRONT ATTACHMENT / Front Attachment
Installation
CAUTION: Front attachment weight: 1110 kg
(2450 Ib)
1. With the front attachment lifted by crane, align the
boom foot with the main frame mating holes.
Install thrust plates (4 used) on both sides of the
boom foot to adjust the clearances on both sides
of boom foot within 1 mm (0.04 in).
W102-04-01-007
CAUTION: Prevent personal injury. Metal
debris may fly when a hammer is used to
install pins. Be sure to wear necessary
protections, such as goggles, hard hat, etc.
2. Drive boom foot pin (7) in with a bar and a
hammer and install plate (6) with bolts (5) (2
used).
: 24 mm
: 210 N⋅m (21.5 kgf⋅m, 155 Ibf⋅ft)
5
6
7
W191-04-01-004
3. Reconnect all hoses and the work light connector.
: 27 mm
: 93 N⋅m (9.5 kgf⋅m, 69 Ibf⋅ft)
W197-04-01-002
W4-1-4