Audio Interface / Mobile Preamp - zZounds.com

More documents

Recommendations

Info

Tutorials TIP . . . Check the Sonar MIDI Monitor in the SysTray to verify that you’re receiving MIDI. The MIDI Connection 5. Your MIDI <strong>Interface</strong> should already be selected as the MIDI input in Omni mode. You can examine this setting if you wish, by clicking on the “Restore Strip Size” box on the new MIDI track that was created. • Note: “Omni” mode allows Proteus VX VSTi to receive on all 16 MIDI channels from your MIDI keyboard. (Proteus VX VSTi is “multi-timbral” and can assign a different preset to each of the 16 MIDI channels.) Open Proteus VX 6. Double-click on the little keyboard icon in the synth track to open the Proteus VX editor. Double-Click Here to Open Proteus VX Synth Track with Proteus VX 7. After a few seconds, the Proteus VX editor screen shown below appears. Preset Inc/Dec keys MIDI Channel Selection Load the Proteus X Composer Bank Before you can play Proteus VX, you have to load a bank of sounds. (This information will be saved when you save your Sonar LE Project.) 8. Open the Proteus X Composer bank. Select Proteus X Composer from the File menu. The bank is installed here by default: “Program Files\Creative Professional\ E-MU Sound Central\Proteus X Composer.” Loading takes a few seconds. 9. Change the Preset using the Inc/Dec keys. (You also have to select a preset before you can hear anything.) This bank contains 1024 different presets (sounds). 32 E-MU Systems
Tutorials 10. Bring up the mini keyboard by clicking the icon on Proteus VX and play a few notes. You should be hearing sound. If not, verify that the Tracker Pre is properly configured. • Note: If the sound volume is very low, you can decrease the Headroom of Proteus VX. (Options, Preferences, Headroom/Boost) Keep in mind that with less headroom, Proteus VX will be more prone to clipping when multiple channels are played. 11. Play your MIDI controller and verify that it plays Proteus VX. If not, make sure that your MIDI keyboard is set to the same MIDI channel number as Proteus VX (probably channel 1). You can also change the MIDI channel of Proteus VX using the channel Inc/Dec keys shown on the previous page. Play a Few Presets. 12. To Audition Presets: first highlight the preset number (i.e. ), then scroll through the presets using the up/down keys on your <strong>com</strong>puter keyboard. 13. Try out the MIDI Controller knobs on your MIDI keyboard. In order to work, the continuous controller numbers of your keyboard knobs must match those on Proteus VX. (Refer to the manual that came with your MIDI keyboard, or change the controller numbers on Proteus VX, located under Options, Preferences, Controllers tab.) 14. Select the 16 channel tab. This page allows you to select presets for all 16 MIDI channels. 16 Channel Tab Select Preset 15. Select a preset for MIDI Channel 1 by clicking the little triangle. NOTE You can also select a single preset for the track by selecting the Program Change number you want. For some unknown reason, Sonar 6 LE filters out program change messages from a MIDI track. A Better Way: Assign up to 16 presets in the Proteus VX Multisetup and record a MIDI track for each channel. TRACKERpre Reference Manual 33
Page 1 and 2: Audio Interface / Mobile Preamp Ref
Page 3 and 4: TABLE OF CONTENTS Introduction ....
Page 5 and 6: Introduction INTRODUCTION Thank you
Page 7 and 8: Computer Requirements COMPUTER REQU
Page 9 and 10: Software Installation 4. Select the
Page 11 and 12: Software Installation 15. If you ha
Page 13 and 14: Insert Connection Example INSERT CO
Page 15 and 16: Input/Output INPUT/OUTPUT 7 8 9 10
Page 17 and 18: Direct Monitoring DIRECT MONITORING
Page 19 and 20: Tutorials Getting Started with Stei
Page 21 and 22: Tutorials 2 - Basic Multitrack Reco
Page 23 and 24: Tutorials 3 - Recording a MIDI Trac
Page 25 and 26: Tutorials 11. Feel free to play aro
Page 27 and 28: Tutorials Set-up the Audio Options
Page 29 and 30: Tutorials 2 - Basic Multitrack Reco
Page 31: Tutorials 3 - Recording a MIDI Trac
Page 35 and 36: Tutorials 28. Select MIDI Channel 2
Page 37 and 38: Tutorials Check the MIDI Parameters
Page 39 and 40: Tutorials 3 - Running Proteus VX fr
Page 41 and 42: Tutorials Change the Preset from Li
Page 43 and 44: Tutorials 7. Open the Preferences v
Page 45 and 46: Tutorials Get Ready to Record on Ch
Page 47 and 48: Troubleshooting Simultaneous WDM/AS
Page 49 and 50: Useful Information USEFUL INFORMATI
Page 51 and 52: Technical Specifications TECHNICAL
Page 53 and 54: Declaration of Conformity DECLARATI
Page 55 and 56: Index INDEX Numerics 1/8" Mini-phon

Audio Interface / Mobile Preamp - zZounds.com

Create successful ePaper yourself

Delete template?

Save as template?