20.01.2013 Views

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

478 Switching Basics <strong>and</strong> Intermediate Routing <strong>CCNA</strong> 3 <strong>Labs</strong> <strong>and</strong> <strong>Study</strong> <strong>Guide</strong><br />

interface Serial0/0<br />

description Link to R2<br />

ip address 172.16.1.2 255.255.255.252<br />

ip ospf message-digest-key 1 md5 allrouters<br />

ip ospf hello-interval 5<br />

ip ospf dead-interval 20<br />

clock rate 56000<br />

no shutdown<br />

!<br />

router ospf 50<br />

log-adjacency-changes<br />

area 0 authentication message-digest<br />

network 172.16.1.0 0.0.0.3 area 0<br />

network 172.16.2.32 0.0.0.31 area 0<br />

!<br />

banner motd $<br />

***********************************<br />

!!!AUTHORIZE ACCESS ONLY!!!<br />

***********************************<br />

$<br />

!<br />

line con 0<br />

exec-timeout 0 0<br />

password cisco<br />

logging synchronous<br />

login<br />

line aux 0<br />

exec-timeout 0 0<br />

password cisco<br />

logging synchronous<br />

login<br />

line vty 0 4<br />

exec-timeout 0 0<br />

password cisco<br />

logging synchronous<br />

login<br />

end<br />

Router1#show ip route<br />

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP<br />

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area<br />

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2<br />

E1 - OSPF external type 1, E2 - OSPF external type 2<br />

i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2<br />

ia - IS-IS inter area, * - c<strong>and</strong>idate default, U - per-user static route

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!