20.01.2013 Views

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

282 Switching Basics <strong>and</strong> Intermediate Routing <strong>CCNA</strong> 3 <strong>Labs</strong> <strong>and</strong> <strong>Study</strong> <strong>Guide</strong><br />

Curriculum Lab 6-6: Add, Move, <strong>and</strong> Change MAC<br />

Addresses (6.2.6)<br />

Figure 6-8 Topology for Lab 6-6<br />

Table 6-6 Lab Equipment Configuration<br />

Switch Switch Name VLAN 1 Default Gateway Subnet Mask<br />

Designation IP Address IP Address<br />

Switch 1 ALSwitch 192.168.1.2 192.168.1.1 255.255.255.0<br />

The enable secret password is class.<br />

The enable, VTY, <strong>and</strong> console password is cisco.<br />

Objectives<br />

■ Create <strong>and</strong> verify a basic switch configuration.<br />

■ Move a PC from one switch port to another <strong>and</strong> add a new PC to the switch.<br />

Background/Preparation<br />

Cable a network that is similar to the one in Figure 6-8. The 2950 switch produced the configuration output<br />

in this lab. Another switch might produce different output. Instructions are also provided for the 1900<br />

series switch, which initially displays a User Interface Menu. Select the Comm<strong>and</strong> Line option from the<br />

menu to perform the steps for this lab.<br />

Start a HyperTerminal session.<br />

FA0/1 FA0/4<br />

Switch 1<br />

Straight-Through Cable<br />

Rollover (Console) Cable<br />

Crossover Cable<br />

Serial Cable<br />

Implement the procedure documented in Appendix B before you continue with this lab.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!