CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

xviii Switching Basics and Intermediate Routing CCNA 3 Labs and Study Guide
Curriculum Lab 6-10: Firmware Upgrade of a Catalyst 2950 Series
Switch (6.2.9) 305
Task 1: Configure the Switch 306
Task 2: Configure the Host Attached to the Switch 306
Task 3: Verify Connectivity 306
Task 4: Display the Name of the Running Image File 306
Task 5: Prepare for the New Image 307
Task 6: Extract the New IOS Image and HTML Files into Flash Memory 307
Task 7: Associate the New Boot File 307
Task 8: Restart the Switch 308
Challenge Lab 6-11: Basic Switch Configuration with Port Security
308
Task 1: Cable the Topology and Clear the Configuration 309
Task 2: Configure the Switch 309
Task 3: Configure and Test Port Security 310
Chapter 7: Spanning Tree Protocol 313
Study Guide 314
Redundant Topologies 314
Vocabulary Exercise: Completion 314
Concept Questions 314
Journal Entry 315
Spanning Tree Protocol 315
Vocabulary Exercise: Matching 316
Vocabulary Exercise: Completion 317
Determine the Root Bridge and Port Roles Exercise 318
Spanning-Tree Recalculation Exercise 322
Concept Questions 323
Lab Exercises 324
Command Reference 324
Curriculum Lab 7-1: Selecting the Root Bridge (7.2.4) 324
Task 1: Configure the Switches 325
Task 2: Configure the Hosts that Are Attached to the Switches 325
Task 3: Verify Connectivity 325
Task 4: Look at the show interface vlan Options 326
Task 5: Look at the VLAN Interface Information 327
Task 6: Look at the Switches’ Spanning-Tree Tables 327
Task 7: Reassign the Root Bridge 329
Task 8: Look at the Switch Spanning-Tree Table 330
Task 9: Verify the Running Configuration File on the Root Switch 331
Curriculum Lab 7-2: Spanning-Tree Recalculation (7.2.6) 332
Task 1: Configure the Switches 333
Task 2: Configure the Hosts that Are Attached to the Switches 333
Task 3: Verify Connectivity 333
Task 4: Look at the VLAN Interface Information 333