20.01.2013 Views

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Task 16: Test the VLANs <strong>and</strong> the Trunk<br />

Step 1. To test the VLANs <strong>and</strong> the trunk, ping from the host in Switch_A port 0/8 to the host in<br />

Switch_B port 0/12.<br />

Was the ping successful? No<br />

Why?<br />

The hosts are on separate VLANs.<br />

Step 2. Ping from the host in Switch_A port 0/8 to the switch IP 192.168.1.2.<br />

Was the ping successful? No<br />

Why?<br />

The interfaces belong to different VLANs.<br />

Task 17: Move the Hosts<br />

Move the host in Switch_B from port 0/12 to port 0/7, wait until the port LED turns green, <strong>and</strong> then go to<br />

the next task.<br />

Task 18: Test the VLANs <strong>and</strong> the Trunk<br />

Step 1. To test the VLANs <strong>and</strong> the trunk, ping from the host in Switch_A port 0/8 to the host in<br />

Switch_B port 0/7.<br />

Was the ping successful? Yes<br />

Why?<br />

The hosts are now on the same VLAN (VLAN 20).<br />

Step 2. Ping from the host in Switch_A port 0/8 to the switch IP 192.168.1.2.<br />

Was the ping successful? No<br />

Why?<br />

The interfaces belong to different VLANs.<br />

Task 19: Move the Hosts<br />

Chapter 9: VLAN Trunking Protocol 409<br />

Move the host in Switch_A from port 0/8 to port 0/2, wait until the port LED turns green, <strong>and</strong> then go to<br />

the next task.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!