20.01.2013 Views

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

512 Switching Basics <strong>and</strong> Intermediate Routing <strong>CCNA</strong> 3 <strong>Labs</strong> <strong>and</strong> <strong>Study</strong> <strong>Guide</strong><br />

network 172.16.7.64 0.0.0.7 area 0<br />

network 172.16.7.84 0.0.0.3 area 0<br />

!<br />

line con 0<br />

exec-timeout 0 0<br />

password cisco<br />

logging synchronous<br />

login<br />

line aux 0<br />

exec-timeout 0 0<br />

password cisco<br />

logging synchronous<br />

login<br />

line vty 0 4<br />

exec-timeout 0 0<br />

password cisco<br />

logging synchronous<br />

login<br />

!<br />

end<br />

DIST-B#show ip interface brief<br />

Interface IP-Address OK? Method Status Protocol<br />

Ethernet0 172.16.7.67 YES manual up up<br />

Ethernet1 unassigned YES unset administratively down down<br />

Loopback0 172.16.7.1 YES manual up up<br />

Serial0 172.16.7.85 YES manual up up<br />

Serial1 unassigned YES unset administratively down down<br />

DIST-B#show ip route<br />

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP<br />

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area<br />

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2<br />

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP<br />

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area<br />

* - c<strong>and</strong>idate default, U - per-user static route, o - ODR<br />

P - periodic downloaded static route<br />

Gateway of last resort is 172.16.7.65 to network 0.0.0.0<br />

172.16.0.0/16 is variably subnetted, 8 subnets, 6 masks<br />

O 172.16.4.0/23 [110/65] via 172.16.7.86, 1d21h, Serial0<br />

O 172.16.6.0/24 [110/65] via 172.16.7.86, 1d21h, Serial0<br />

C 172.16.7.0/26 is directly connected, Loopback0<br />

O 172.16.0.0/22 [110/65] via 172.16.7.86, 1d21h, Serial0<br />

O 172.16.7.80/30 [110/74] via 172.16.7.66, 1d21h, Ethernet0

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!