20.01.2013 Views

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Step 3. Type the switch IP address into the Location field (Netscape) or Address field (Internet<br />

Explorer) <strong>and</strong> press Enter.<br />

Step 4. Because you have not secured access to the switch web interface, you will get a web page from<br />

the switch. You will not be asked to supply a username or password.<br />

Task 15: Exit the Switch<br />

Step 1. Exit to the switch welcome screen.<br />

Switch#exit<br />

Step 2. Remove <strong>and</strong> store the cables <strong>and</strong> adapter.<br />

Curriculum Lab 6-3: Managing the MAC Address Table<br />

(6.2.3)<br />

Figure 6-5 Topology for Lab 6-3<br />

Table 6-3 Lab Equipment Configuration<br />

Switch Switch Name VLAN 1 IP Default Gateway Subnet Mask<br />

Designation Address IP Address<br />

Switch 1 ALSwitch 192.168.1.2 192.168.1.1 255.255.255.0<br />

The enable secret password is class.<br />

The enable, VTY, <strong>and</strong> console password is cisco.<br />

Objective<br />

FA0/1 FA0/4<br />

Switch 1<br />

Straight-Through Cable<br />

Rollover (Console) Cable<br />

Create a basic switch configuration <strong>and</strong> manage the switch MAC table.<br />

Chapter 6: Catalyst Switch Configuration 267<br />

Crossover Cable<br />

Serial Cable

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!