CCNA 3 Labs and Study Guide - BINARYBB.INFO – @jagalbraith

viii Switching Basics and Intermediate Routing CCNA 3 Labs and Study Guide
Contents
Chapter 1: Introduction to Classless Routing 1
Study Guide 2
VLSM 2
Vocabulary Exercise: Matching 3
Vocabulary Exercise: Completion 4
Subnetting Review Exercises 4
Prefix Length Use Exercises 7
VLSM Subnetting a Subnet Exercises 9
VLSM Addressing Design Exercises 12
VLSM Addressing Design Scenarios 16
Summary Route Exercises 23
Default and Static Routing Scenario 30
Concept Questions 31
VLSM Case Study 32
RIP Version 2 34
Compare and Contrast Exercise 34
Internet Research 34
Lab Exercises 37
Command Reference 37
Curriculum Lab 1-1: Calculating VLSM Subnets (1.1.4) 37
Task 1: Divide the Allocated Addresses into Four Equal-Sized Address Blocks 38
Task 2: Allocate the Next Level After All the Requirements Are Met for the Higher
Level(s) 39
Task 3: Allocate Address Space for Sydney 39
Task 4: Allocate Address Space for Singapore 40
Task 5: Allocate Address Space for WAN Links 41
Curriculum Lab 1-2: Review of Basic Router Configuration with RIP
(1.2.3) 43
Task 1: Basic Router Configuration 45
Task 2: Start the HyperTerminal Program 45
Task 3: Name the HyperTerminal Session 45
Task 4: Specify the Computer’s Connecting Interface 45
Task 5: Specify the Interface Connection Properties 46
Task 6: Close the Session 48
Task 7: Reopen the HyperTerminal Connection 48
Task 8: Configure Hostname and Passwords on Router GAD 49
Task 9: Configure Interface Serial 0 on Router GAD 49
Task 10: Configure the Fast Ethernet 0 Interface on Router GAD 49
Task 11: Configure the IP Host Statements on Router GAD 49
Task 12: Configure RIP Routing on Router GAD 50
Task 13: Save the GAD Router Configuration 50
Task 14: Configure Hostname and Passwords on Router BHM 50
Task 15: Configure Interface Serial 0 on Router BHM 50