LTI TRUCAM LASER MEASUREMENT DEVICE - Tele-Traffic

More documents

Recommendations

Info

LCD Backlight You can vary the intensity of the LCD Backlight to account for different lighting conditions. The LCD Backlight has five intensity settings. When the   toolbar button is displayed, tap it or press the soft key to adjust the intensity of the backlight. Tap repeatedly until the desired level is achieved. 0 = dim 1 = bright 2 = brighter 3 = default 4 = brightest TruCAM Image Viewer TruCAM Image Viewer is a software program that runs on a PC and allows you to view the motion clips and still images. It is covered in Section 9 (page 54). 16 © Tele-Traffic UK Ltd 2011
Section 3 - TruCAM System and Information Screens This section covers the screens that display system information and prepare the TruCAM for measuring speeds and capturing motion clips / still images. Powering ON the TruCAM Press the Power button or pull and release the TRIGGER. The TruCAM Splash Screen appears briefly, it should look like Figure 21. Figure 21 Next the instrument’s microcontroller performs the Self Test. If all tests prove positive, the Self Test Results Screen appears briefly, it should look like Figure 22. Figure 22 Next the System Setup Screen is displayed (please Figure 24 on the following page). If all tests do not prove positive, the appropriate error code will appear. Figure 23 shows an example error message box. If the Self Test indicates an error message: Press the Power button to power OFF the TruCAM. Remove and re-insert the Battery Pack (page 8). Power ON the TruCAM one more time to repeat the Self Test. If the error repeats, power OFF the TruCAM. If the power source is not the problem, contact Tele Traffic UK Ltd for assistance. See the inside front cover for Tele Traffic UK Ltd contact information. 17 Figure 23 © Tele-Traffic UK Ltd 2011
Page 1 and 2: LTI TRUCAM LASER MEASUREMENT DEVICE
Page 3 and 4: Section 4 - Roadside Laser/Camera S
Page 5 and 6: Section 1 - Introduction to the Tru
Page 7 and 8: Views of the TruCAM 3 Front/Left Si
Page 9 and 10: Motion Clip Playback: 1. Tap   or
Page 11 and 12: The colour of the LED charge indica
Page 13 and 14: Understanding the Battery Voltage I
Page 15 and 16: Secure Digital (SD) Card. Caution
Page 17 and 18: Real Time Clock The TruCAM’s inte
Page 19: Icons The icons are the images that
Page 23 and 24: LOCATION: Use the stylus and on-scr
Page 25 and 26: To change the Date & Time: 1. Use t
Page 27 and 28: MEASUREMENT UNITS: This option is f
Page 29 and 30: DEVICE INFORMATION SCREEN To displa
Page 31 and 32: POWER OFF TIMER: Instrument power O
Page 33 and 34: TRACK STORAGE: Selectable frame sto
Page 35 and 36: Section 4 - Roadside Laser/Camera S
Page 37 and 38: Adjusting Camera Settings The Camer
Page 39 and 40: Attaching / Removing the Shoulder S
Page 41 and 42: Speed Mode Speed Mode is the defaul
Page 43 and 44: Video Only Mode When this mode is a
Page 45 and 46: Manually Entering the Roadside Offs
Page 47 and 48: Section 6 - Playback Mode To view p
Page 49 and 50: Toolbar Button          
Page 51 and 52: 1. Select a target. Choose a promin
Page 53 and 54: Fixed Distance Zero Velocity Test I
Page 55 and 56: Caring for the LCD Touch Screen To
Page 57 and 58: See table below. Parameter Factory
Page 59 and 60: Using the Menu Bar The Menu Bar inc
Page 61 and 62: Transferring the *.jmf Files from t
Page 63 and 64: To view the more detail information
Page 65 and 66: Previously changed the user passwor
Page 67 and 68: In Playback Mode when listing folde
Page 69 and 70: Sounds from the TruCAM The TruCAM e
Page 71 and 72:
TruCAM Tool Bar Buttons The toolbar
Page 73 and 74:
Self Test: At power ON, a number of
Page 75 and 76:
Hardware Processor: Computer: AT32A
Page 77 and 78:
Index A Accessories 1 AGC. See auto
Page 79:
R Radio frequency interference (RFI
show all

LTI TRUCAM LASER MEASUREMENT DEVICE - Tele-Traffic

Create successful ePaper yourself

Delete template?

Save as template?