LTI TRUCAM LASER MEASUREMENT DEVICE - Tele-Traffic

DEVICE INFORMATION SCREEN
To display the Device Information Screen:
On the System Options Screen, double-tap
“Display .” that appears just below DEVICE
INFORMATION.
VERSION: TruCAM model, package and
firmware version number.
In this example: TC100-1.19-7 / R2.8.18
• Model = TC100 = TruCAM 100
• TruCore Version = 1.19-7
• TruCAM Version = R2.8.18
SERIAL AND FILM NUMBER:
• Serial Number: The serial number of your TruCAM. In this example = TC0000484.
• Film Number: 7-digit sequence number that is increased by ‘1’ each time a *.jmf file is saved to
the SD Card.
• The Film Number is not related to any particular SD Card. The information associated with the
Film Number counter resides on the TruCAM and cannot be reset. In the Film Number = 0000002
(The TruCAM with serial number TC000484 has stored a total of 2 *.jmf files)
The last 3 digits of the Film Number are displayed during Capture Mode (page 36) and Playback Mode
(page 43).
If the Battery Pack is accidentally removed or the SD Card is rejected while a *.jmf file is being saved,
the Film Number may be not increased. The folder will have two *.jmf files that have the same Film
Number and the first file will be damaged.
SELF TEST: Displays the results of the power ON Self Test.
• [0] Indicates that all tests proved positive.
• If all tests do not prove positive, the appropriate error code will appear in this field. For more
information about Error Codes, see page 64. Example: E52 = temperature too low.
LINUX: Operating system version number and information.
LICENCED FUNCTIONS:
Licensed programs that are active in your TruCAM
• Default: SPEED: includes Speed Mode, Rear Plate Mode, Video Only Mode, Weather Mode, Night
Mode (requires additional hardware)
• Available Options: DBC
25
System Options
Screen
Figure 30
INSTALLED DEVICES: Displays the devices that are installed in your TruCAM.
RTC = Real Time Clock GPS = Global Position System Receiver
Device Information
Screen
© Tele-Traffic UK Ltd 2011