manual de instalação e utilização transmissor console ... - Usicontrol

Example: VT100 data feedback
Write messages on display
The texts are sent in 8 packages of 8 bytes each, preceded by an identifier COB_ID=0x300+node_ID. Inside these packages, you can send texts by different
modes for view the same message. For example, the next text:
We can write the next message differently:
Column
1 2 3 4 5 6 7 8 9 10 11 12
TM70Pi V3.2 (11/02) 120021.pdf. 37
IKUSI reserves the right to change this information without prior notice.
File
1 I K U S I
2 I K U S I I K U S I
a) First, will appear ‗IKUSI‘ text, then we will move the position of the cursor to line2-column 1, and finally we will visualize the text ‗IKUSI IKUSI‘ on the second
line.
Text Shift command Text Text
Position Message (Hex) Meaning Position Message (Hex) Meaning Position Message (Hex) Meaning Position Message (Hex) Meaning
LCD1 49 I LCD1 1B ESC LCD1 49 I LCD1 49 I
LCD2 4B K LCD2 5B [ LCD2 4B K LCD2 4B K
LCD3 55 U LCD3 32 Line 2 LCD3 55 U LCD3 55 U
LCD4 53 S LCD4 3B ; LCD4 53 S LCD4 53 S
LCD5 49 I LCD5 31 Column 1 LCD5 49 I LCD5 49 I
LCD6 00 LCD6 48 LCD6 20 Space LCD6 20 Space
LCD7 00 LCD7 6D Final command 'm‘ LCD7 00 LCD7 00
LCD8 00 LCD8 00 LCD8 00 LCD8 00