Cours sur les méthodes d'évaluation acoustique ... - Fao - Copemed

VERY IMPORTANT:Before passing CALLEBRER you have to be sure that:• No repeated miles in "celdas.csv"• Both "celdas.csv" as "regiones.csv" are sorted in increasing order of interval (ormile). In the file "regiones.csv" the names of the regions has no quotes orunnecessary whitespace• In the file "regiones.csv", the last interval that appears in this file is equal to thelast interval that appears in CELL +1 (adding "0" in the column of NASC andthe same name of the region that the region above)• To run the program it is necessary that the files Xepa (xepa_m2, xepa_numero,xepa size) are 16 columns (13 for the targeted species and regions and 3 zeros)The working directory is PACUSWIN evaluation. On the left, there are 3 boxes wherewe must place the appropriate file: regions xepa_m2 and cells.When placing regions (to click on it is in bold), click the "revisor_regiones" and theprogram will tell us whether or not the regions are ordered (in the latter case we woulderror, the document would have to go and sort regions).Then put the xepa_m2When placing the cells, press the "revisor_celdas" in this case if we are out of order willfail. Then click on "controlador" and if there are some milles associate wrongly to aradial or inter-radial, the program said it to us, and then we will correct it and go onwhit the applicationOnce all checks are good and there is the problem of the miles you can run the programpressing “a por ellos!” When the file finishes executing the button is replaced with “lospillé!” and inactivated itself to avoid mistakes. [If you want to do another generalmillas,when you change the output file name comes back on the A button for them!]