OS 75x100 mm.pdfTélécharger - KWH Mirka Ltd

Product Configuration/Specifications: 10,000 OPM Orbital Sander
Product Configuration and Specifications: 10,000 OPM 75 mm x 100 mm (3 in. x 4 in.) Orbital Sander – 3 mm (1/8 in.) Orbit
Note: All Self Generated Vacuum machines use Ø 28 mm (1 in.) Vacuum Hose Fittings Standard. Ø 19 mm (3/4 in.) is available.
All Central Vacuum machines use Ø 19 mm (3/4 in.) Vacuum Hose Fittings Standard. Ø 28 mm (1 in.) is available.
Orbit Vac
Type
3 mm
(1/8 in,)
Central
Vacuum
Self-Gen
Vacuum
Pad Size
mm (in,)
75 x 100
(3 x 4)
75 x 100
(3 x 4 )
Non-vac 75 x 100
(3 x 4 )
Model
Number
Product Net
Weight kg
(Pounds)
Specifications subject to change without prior notice.
Height
mm
(inch)
OS343CV 0,72 (1,58) 83,5
(3,29)
OS343DB 0,72 (1,58) 83,5
(3,29)
OS343NV 0,70 (1,55) 83,5
(3,29)
Length
mm
(inch)
202,4
(8,0)
208,9
(8,2)
139,3
(5,5)
*The values stated in the table are from laboratory testing in conformity with stated codes and standards and are not sufficient for
risk evaluation. Values measured in a particular work place may be higher than the declared values. The actual exposure values
and amount of risk or harm experienced to an individual is unique to each situation and depends upon the surrounding environment,
the way in which the individual works, the particular material being worked, work station design as well as upon the exposure
time and the physical condition of the user. KWH Mirka, Ltd. cannot be held responsible for the consequences of using declared
values instead of actual exposure values for any individual risk assessment.
Further occupational health and safety information can be obtained from the following websites:
http://europe.osha.eu.int (Europe)
http://www.osha.gov (USA)
6
Power
watts
(HP)
179
(0,24)
179
(0,24)
179
(0,24)
Air Consumption
LPM (scfm)
*Noise
Level
dBA
*Vibration
Level
m/s 2
*Uncertainty
K
m/s 2
453 (16) 76 2,6 1,3
453 (16) 81 3,5 1,7
453 (16) 76 2,6 1,3
The noise test is carried out in accordance with EN ISO 15744:2008 - Hand-held non-electric power tools - Noise measurement code - Engineering method
(grade 2).
The vibration test is carried out in accordance with EN 28662-1. Hand-held portable power tools – Measurement of vibration at the handle. Part 1: General and
EN 8662-8, 1997. Hand-held portable power tools – Measurement of vibration at the handle. Part 8: Polishers and rotary, orbital and random orbital sanders.