HP iLO 3 Scripting and Command Line Guide - Business Support ...

• User does not have correct privilege for action. CONFIG_ILO_PRIV
required.
• Failed to update the hot key.
GET_HOTKEY_CONFIG
Use this command to retrieve hotkeys available for use in remote console sessions. Use
CPQLOCFG.EXE version 4.00 or later with this script. Replace USER_LOGIN and PASSWORD
values with values that are appropriate for your environment.
GET_HOTKEY_CONFIG parameters
None
GET_HOTKEY_CONFIG runtime errors
A possible GET_HOTKEY_CONFIG error message is:
Unable to get the hot keys.
GET_HOTKEY_CONFIG return messages
An example of the information returned with the response:
SET_FIPS_ENABLE
Use this script to enable the Federal Information Processing Standard Enforce AES/3DES Encryption
setting, in iLO 3 v1.50 or later. Use CPQLOCFG.EXE version 2.26 or later with this script. Replace
USER_LOGIN and PASSWORD values with values that are appropriate for your environment.
NOTE: All active connections (including Remote Console and Virtual Media sessions) to the iLO
device are dropped immediately when this script executes.
To disable FIPS, use the FACTORY_DEFAULTS command.
SET_FIPS_ENABLE parameters
None
100 RIBCL XML Scripting Language