HP iLO 3 Scripting and Command Line Guide - Business Support ...

COMPUTER_LOCK_CONFIG parameters
The computer lock on Windows based operating systems defaults to the Windows logo + L keys.
You can customize Linux and other operating systems by setting the following parameter:
For example:
COMPUTER_LOCK_CONFIG runtime errors
Possible COMPUTER_LOCK_CONFIG error messages include:
• RIB information is open for read-only access. Write access is
required for this operation.
• Invalid number of parameters. The maximum allowed is five.
• User does not have correct privilege for action. CONFIG_ILO_PRIV
required.
• Invalid COMPUTER_LOCK option; value must be windows, custom, or
disabled.
• COMPUTER_LOCK value must be set to custom to use the
COMPUTER_LOCK_KEY tag.
• The COMPUTER_LOCK key command was used without a preceding
COMPUTER_LOCK value command equal to custom.
• The key parameter specified is not valid.
GET_NETWORK_SETTINGS
The GET_NETWORK_SETTINGS command requests the respective iLO network settings. For this
command to parse correctly, the command must appear within a RIB_INFO command block, and
RIB_INFO MODE can be set to read or write.
For example:
GET_NETWORK_SETTINGS parameters
None
GET_NETWORK_SETTINGS runtime errors
None
GET_NETWORK_SETTINGS return messages
A possible GET_NETWORK_SETTINGS return message is:
RIB_INFO 71