HP iLO 3 Scripting and Command Line Guide - Business Support ...

• Added SET_SECURITY_MSG command
• Added GET_ASSET_TAG command
• Added SET_ASSET_TAG command
• Added FIPS_ENABLE command
• Added GET_FIPS_STATUS command
• Updated CERTIFICATE_SIGNING_REQUEST command
• Updated SET_ONE_TIME_BOOT command
• Updated HOLD_PWR_BTN command
• Updated MOD_NETWORK_SETTINGS command
• Updated MOD_DIR_CONFIG command (for schema-free directory scripts)
HP Insight Control server deployment
12 Introduction
HP Insight Control server deployment integrates with iLO to enable the management of remote
servers and to monitor the performance of remote console operations, regardless of the state of
the operating system or hardware.
The deployment server provides the capability to use the power management features of iLO to
power on, power off, or cycle power on the target server. Each time a server connects to the
deployment server, the deployment server polls the target server to verify the presence of a LOM
management device. If installed, the server gathers information, including the DNS name, IP
address, and user login name. Security is maintained by requiring the user to enter the correct
password for that user name.
For more information about the HP Insight Control server deployment, see the documentation that
ships on the HP Insight software DVD, or the HP website at http://www.hp.com/go/insightcontrol.