HP iLO 3 Scripting and Command Line Guide - Business Support ...
HP iLO 3 Scripting and Command Line Guide - Business Support ...
HP iLO 3 Scripting and Command Line Guide - Business Support ...
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
GET_PWREG parameters<br />
None<br />
GET_PWREG return messages<br />
A GET_PWREG return message includes:<br />
<br />
<br />
Where:<br />
• PCAP mode is either set to MAN followed by a positive integer, or set to OFF.<br />
• EFFICIENCY_MODE is a number between 1 <strong>and</strong> 4:<br />
◦<br />
1 — PWRREGMODE_OS_CONTROL<br />
◦ 2 — PWRREGMODE_STATIC_LOW<br />
◦ 3 — PWRREGMODE_DYNAMIC<br />
◦ 4 — PWRREGMODE_STATIC_HIGH<br />
• GET_HOST_POWER reports whether the virtual power button is enabled.<br />
GET_PWREG runtime errors<br />
SET_PWREG<br />
Possible GET_PWREG runtime errors:<br />
• Feature not supported.<br />
• This feature requires an installed license key.<br />
The SET_PWREG comm<strong>and</strong> sets the power alert threshold for <strong>iLO</strong> 2, <strong>iLO</strong> 3, <strong>and</strong> <strong>iLO</strong> 4 devices.<br />
For this comm<strong>and</strong> to parse correctly, the SET_PWREG comm<strong>and</strong> must appear within a SERVER_INFO<br />
comm<strong>and</strong> block, <strong>and</strong> SERVER_INFO MODE can be set to write. You must purchase the <strong>iLO</strong><br />
Advanced license to enable this feature.<br />
For example:<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
SET_PWREG parameters<br />
PWRALERT TYPE — Valid values are:<br />
• DISABLED — No power alerts are set.<br />
• PEAK — Represents the half-second average power reading during the sample.<br />
• AVERAGE — Represents the mean power reading during the sample.<br />
SERVER_INFO 121