HP iLO 3 Scripting and Command Line Guide - Business Support ...

Firmware update
Firmware commands enable you to display and modify the iLO 3 firmware version. Table 13 (page
49) shows the Firmware Update properties. Firmware settings are available at:
/map1/firmware1
Targets
No targets
Table 13 Firmware Update Properties
Property
version
date
Command format
Access
read
read
Description
load -source URL [target]
Displays the current firmware version.
Displays the release date of the current firmware version.
where URL is the URL of a firmware update image file on a web server. The URL is limited to 80
characters.
URL example:
protocol://username:password@hostname:port/filename
• protocol—Mandatory field that must be HTTP or HTTPS.
• username:password—Optional field
• hostname—Mandatory field
• port—Optional field
• filename—Mandatory field
The CLP only performs a cursory syntax verification of the URL value. You must visually ensure that
the URL is valid.
For example
load -source http://imgserver.company.com/firmware/iloFWimage.bin
load -source http://john:abc123@imgserver.company.com/firmware/ilo.bin
load /map1/firmware1 -source
http://imgserver.company.com/firmware/iloFWimage.bin
The [target] field is:
/map1/firmware1—This field is optional if it is already the current target.
Eventlog commands
Eventlog commands enable you to display or delete the logs of both the system and iLO 3.
Table 14 (page 50) shows the Eventlog command properties. Eventlog settings are available at:
• /system1/log1—IML
• /map1/log1—iLO event log
Targets
record:1..n
Where n is the total number of records.
Specific commands 49