HP iLO 3 Scripting and Command Line Guide - Business Support ...

SET_SECURITY_MSG parameters
None
SET_SECURITY_MSG runtime errors
The value for the SECURITY_MESSAGE parameter must a Y or an N, otherwise the command
reports an error. You may also see this error:
User does NOT have correct privilege for action. CONFIG_ILO_PRIV
required.
HOTKEY_CONFIG
The HOTKEY_CONFIG command configures the remote console hot key settings in iLO. For this
command to parse correctly, the command must appear within a RIB_INFO command block, and
RIB_INFO MODE must be set to write. The user must have the configure iLO privilege to execute
this command.
Upper or lower case values are automatically changed to the proper case as needed (lower case
is changed to upper case if needed, and upper case is changed to lower case if needed.) If you
use double or single quotes, it must be different from the delimiter. Specifying a blank string removes
the current value.
NOTE: Each hot key can have up to five selections (for example, CTRL_T="CTRL,ALT,ESC,F2,F4").
Do not use spaces (“ “) in the values; to set a space in a value type SPACE.
Use this command to configure hotkeys in iLO 3 v1.50 or later. Use CPQLOCFG.EXE version 4.01
or later with this command. Replace USER_LOGIN and PASSWORD values with values that are
appropriate for your environment.
98 RIBCL XML Scripting Language