HP iLO 3 Scripting and Command Line Guide - Business Support ...

GET_OA_INFO return messages
A possible GET_OA_INFO return message is:
192.168.1.105
00:22:44:55:33:77
1
On
South Park
Kenny
7
SERVER_INFO
The SERVER_INFO command can only appear within a LOGIN command block. Only commands
that are SERVER_INFO type commands are valid inside the SERVER_INFO command block.
SERVER_INFO requires the MODE parameter with a value of read or write. MODE is a specific
string parameter with a maximum length of 10 characters that specifies what you intend to do with
the information.
Write mode enables both the reading and writing of iLO information. Read mode prevents
modification of iLO information.
For example:
……… SERVER_INFO commands ………
Reset server example:
Set host power example:
GET_SERVER_NAME
The GET_SERVER_NAME command is used to retrieve the host server name used by iLO. You can
set this parameter using several methods, including the SERVER_NAME command, host RBSU, iLO
browser-based interface, and loading HP ProLiant Management Agents.
This command is supported by iLO 3 firmware version 1.20 or later.
For example:
SERVER_INFO 111