HP iLO 3 Scripting and Command Line Guide - Business Support ...
HP iLO 3 Scripting and Command Line Guide - Business Support ...
HP iLO 3 Scripting and Command Line Guide - Business Support ...
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Specify one or more properties in the comm<strong>and</strong> line. If multiple properties are on the same comm<strong>and</strong><br />
line, they must be separated by a space.<br />
For example:<br />
set /map1/config1 oemhp_computer_lock=windows<br />
set /map1/config1 oemhp_computer_lock=custom,l_gui,l<br />
set /map1/config1 oemhp_computer_lock=disabled<br />
For a complete list of oemhp_computer_lock custom keys, see the <strong>HP</strong> <strong>iLO</strong> User <strong>Guide</strong> on the<br />
<strong>HP</strong> website at: http://www.hp.com/go/ilo3 <strong>and</strong> click More <strong>iLO</strong> Documentation. Keys with a<br />
space must have the space replaced with an underscore.<br />
For example:<br />
set /map1/config1 oemhp_computer_lock=custom,SYS_RQ<br />
<strong>iLO</strong> 3 embedded health settings<br />
<strong>iLO</strong> 3 embedded health comm<strong>and</strong>s enable you to display system embedded health information<br />
for fans, temperature sensors, voltage sensors, <strong>and</strong> power supplies. Table 4 (page 41) shows the<br />
<strong>iLO</strong> 3 Embedded Health properties.<br />
The <strong>iLO</strong> 3 embedded health CLP settings are:<br />
• /system1/fan*<br />
• /system1/sensor*<br />
• /system1/powersupply*<br />
Targets<br />
• Fan<br />
• Sensor<br />
• Powersupply<br />
Table 4 Embedded Health Properties<br />
Property<br />
DeviceID<br />
ElementName<br />
OperationalStatus<br />
VariableSpeed<br />
DesiredSpeed<br />
HealthState<br />
RateUnits<br />
CurrentReading<br />
SensorType<br />
Oemhp_CautionValue<br />
Oemhp_CriticalValue<br />
Access<br />
Read<br />
Read<br />
Read<br />
Read<br />
Read<br />
Read<br />
Read<br />
Read<br />
Read<br />
Read<br />
Read<br />
Description<br />
Displays fan, sensor, or power supply label number<br />
Displays fan, sensor, or power supply location<br />
Displays fan, sensor, or power supply operational status<br />
Displays if fan is operating at variable speed<br />
Displays the current fan speed<br />
Displays the health status of the fan, sensor, or power supply<br />
Displays the reading units for temperature <strong>and</strong> voltage sensors<br />
Displays the current reading of sensor<br />
Displays the sensor type<br />
Displays temperature sensor caution value<br />
Displays temperature sensor critical value<br />
NOTE: All available embedded health properties from all targets are shown in Table 4 (page<br />
41). The actual properties returned depend on the comm<strong>and</strong>.<br />
For example<br />
The following comm<strong>and</strong> displays the system fan1 properties:<br />
Specific comm<strong>and</strong>s 41
Change language