Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.4.4.18. AT+CMUX Set Multiplexing mode
Command Function This command is used to enable/disable
the GSM 07.10 multiplexing protocol control
channel. Refer to subclause 9.2 for
possible values. The AT command
sets parameters for the Control Channel. If
the parameters are left out, the default
value is used.
Command Functional Phone Control
Group
Command Format Query AT+CMUX=?
Response: +CMUX: (list of supported s),(list of
supported s),(list of supported
s),(list of supported
s),(list of supported s),(list of
supported s),(list of supported
s),(list of supported s),(list of
supported s)
+CMUX: (1),(0),(1-5),(10-100),(1-255),(0-
100),(2-255),(1-255),(1-7)
GSM0107PB001MAN Page 110 of 370 1.08 – 25 January 2007
OK
Write Format AT+CMUX=,[],
,,, ,,
[,]
Response OK
Read Format AT+CMUX?
Response OK
Execution Format N/A
Response N/A
If in CMUX it will return the current settings