Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
Output Output Reset
Timer Event
0 = do not add $MDMID value
Bit 3: 1 = add GPIO data and
direction (2 bytes binary or 6
bytes ASCII)
0 = do not add GPIO data
Bit 4: 1 = add ADC-1 value (2 bytes
binary or 5 bytes ASCII)
0 = do not add ADC-1 value
Bit 5: 1 = add ADC-2 value (2 bytes
binary or 5 bytes ASCII)
0 = do not add ADC-1 value
Bit 6: 1 = N/A
0 = discard data when out of
coverage
Bit 7: 1 = add Input Event code (1
bytes binary or 3 bytes
ASCII)
0 = do not add Input Event code
Bits 8-17: Reserved
Bit 18: 1 = send message via SMS
when GPRS is not present
0 = do not send message via
SMS as backup
Bits 19–20: Reserved
Bit 21: 1 = add current RTC Time and
Date (6 – bytes of RTC
information in Binary format
or 13 – bytes if Bit-0 is set to
0)
0 = do not add RTC time and
date
Bit 22: 1 = Replace/append modem ID
field with 10-byte modem ID
(including one leading and
one ending space character)
if bit-0 is set to 1 (no leading
or ending space characters
in binary mode). (NOTE: bit-
22 setting overrides bit-2
setting)
0 = sent the modem ID as
defined by Bit-2
Bits 23-32: Reserved
Parm2 defines the time that the timer
needs to be reset to. A value of 0
GSM0107PB001MAN Page 271 of 370 1.08 – 25 January 2007