Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.5.3.2. AT+CMGL List Messages
(continued)
Reference GSM Ref. 07.05 Chapter 3.4.2
Standard Scope Optional
Enfora Implementation Scope Partial
Notes Above settings for assume
AT+CMGF=1 (text mode). For
AT+CMGF=0 (PDU mode), the following
values are supported: 0,1,2,3,4.
Parameters in [] may or may not be
reported dependent upon the setting
of AT+CMGF.
:
0 “Rec Unread”
1 “Rec Read”
2 “Sto Unsent”
3 “Sto Sent”
4 “ALL”
GSM0107PB001MAN Page 135 of 370 1.08 – 25 January 2007