Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.5.3.1. AT+CNMI New Message Indication to TE
(continued)
Receiving procedure for different message data coding schemes
(refer GSM 03.38 [2])
0 no class: as in GSM 03.38, but use as preferred
memory
class 0: as in GSM 03.38, but use as preferred
memory if message is tried to be stored
class 1: as in GSM 03.38, but use as preferred
memory
class 2: as in GSM 03.38
class 3: as in GSM 03.38, but use as preferred
memory
message waiting indication group (discard message): as in GSM
03.38, but use as preferred memory if
message is tried to be stored
message waiting indication group (store message): as in GSM
03.38, but use as preferred memory
1 as =0 but send indication if message stored successfully
2 no class: route message to TE
class 0: as in GSM 03.38, but also route message to TE and
do not try to store it in memory
class 1: route message to TE
class 2: as =1
class 3: route message to TE
message waiting indication group (discard message): as in GSM
03.38, but also route message to TE and do not try to
store it in memory
message waiting indication group (store message): as =1
3 class 3: route message to TE
others: as =1
0 No CBM indications are routed to the
TE
1 If CBM is stored into ME/TA,
indication of the memory location is
routed to the TE using unsolicited
result code:
+CBMI: ,
2 New CBMs are routed directly to the
TE using unsolicited result code
GSM0107PB001MAN Page 132 of 370 1.08 – 25 January 2007