Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
3.2.10.2. $RTCTIME Real Time Clock Time
(continued)
Parameter Values Parameters are positional dependent, any
parameter may be omitted with the use of
the comma (‘,’) as a place holder on
command line. If a parameter is omitted
then the current value in the hardware is
used.
< rtc_wkday > Current week day matching time day being
set.
The week day values range from 0..6,
where;
0->Sunday, 1->Monday, 2->Tuesday,
3->Wednesday, 4->Thursday, 5->Friday,
and 6->Saturday.
< rtc_year > The year on which the time is being set to.
The RTC supports years 2000-2099. The
data is entered as a two digit value 0..99.
The month on which the time is being set
to. Values range from 1..12.
The day on which the time is being set to.
Values range from 1..31.
The hour on which the time is being set to.
Values range from 0..24 for 24-Hour mode
settings.
NOTE: only 24-Hour mode currently
supported.
The minute on which the time is being set
to. Values range from 0..59.
The second on which the time is being set
to. Values range from 0..59.
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
GSM0107PB001MAN Page 287 of 370 1.08 – 25 January 2007