Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.6.2.10. S8 Dial Pause
Command Function This command sets the number of seconds
to wait for the comma dial modifier in the
ATD dial string. This is a dummy command
that will display a value that has been set,
but does not affect functionality.
Command Functional Call Control
Group
Command Format Query ATS8=?
Response S8(0-255)
OK
Write Format ATS8=
Response OK
Read Format ATS8?
Response 002
OK
Execution Format N/A
Response N/A
Parameter Values N/A
Reference ITU-T Ref. V.25ter Chapter 6.3.11
Standard Scope Mandatory
Enfora Implementation Scope Full
Notes Does not affect GSM functionality.
GSM0107PB001MAN Page 175 of 370 1.08 – 25 January 2007