Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.4.3.7. AT+CLCKSP Set Provider Personalization Lock
Command Function This command allows the user to set,
delete and or display the Service Provider
personalization lock codes, which are
stored in the phone device.
Command Functional Enfora Specific
Group
Command Format Query AT+CLCKSP=?
Response +CLCKSP: (0-2),(0-FE)
OK
Write Format AT+CLCKSP= ,
Response OK
Read Format AT+CLCKSP?
Response SP: “”…
Execution Format N/A
Response N/A
Parameter Values
< operation code > Operation to be performed. The available
options are;
0 => Delete the value
“sp_personalization_code”, from the
current list stored in the phone.
1=> Add the value
“sp_personalization_code”, to the current
list stored in the phone.
2=> Delete ALL entries from the phone
stored list. When this operation is selected
the user MUST enter the value of D6 for the
sp_personalization_code. This acts as
safety
< sp_personalization_code > SP personalization code which to set or
delete from the phones stored list. The
valid range for this parameter is 0..FE. The
values are hexadecimal input only.
GSM0107PB001MAN Page 47 of 370 1.08 – 25 January 2007