Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.4.3.8. AT+CPWD Change Password
(continued)
Password specified for the facility. If an old
password has not yet been set,
is not entered
“new password”
Reference GSM Ref. 07.07 Chapter 7.5
Standard Scope Optional
Enfora Implementation Scope Partial
Notes In order to change the password, the
applicable facility must be enabled. See
AT+CLCK.
Example:
Enter first password for Network Personalization:
AT+CPWD=”PN”,,”xxxx”
To change SIM PIN:
AT+CPWD=”SC”,”xxxx”,”yyyy”
Password for Network Personalization
Network Personalization
New password
Old password
SIM PIN
GSM0107PB001MAN Page 51 of 370 1.08 – 25 January 2007