Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.6.1.20. AT+IPR Fixed TE-TA Data Rate
Command Function Determines the data rate of the TA serial
interface.
Command Functional State Control
Group
Command Format Query AT+IPR=?
Response +IPR: (75, 150, 300, 600, 1200, 2400,
4800, 7200, 9600, 14400, 19200, 28800,
38400, 57600, 115200)
OK
Write Format AT+IPR=
Response OK
Read Format AT+IPR?
Response +IPR: 19200
OK
Execution Format N/A
Response N/A
Parameter Values
75, 150, 300, 600, 1200, 2400, 4800, 7200,
9600, 14400, 19200, 28800, 33900, 38400,
57600, 115200
Reference GSM Ref. 07.05 Chapter 6.2.10
Standard Scope Mandatory
Enfora Implementation Scope Partial
Notes When changing the value of AT+IPR, the
new baud rate is effective immediately. In
order to properly save the new setting and
communicate with the modem, the user
must change the baud rate of the
communicating device to the new baud rate
before any more communication with the
modem can be accomplished.
GSM0107PB001MAN Page 162 of 370 1.08 – 25 January 2007