Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
ME Errors
2.4.4.19. AT+CMEE Report Mobile Equipment Errors
Command Function Set command disables or enables the use
of result code +CME ERROR: as an
indication of an error relating to the
functionality of the ME. When enabled, ME
related errors cause +CME ERROR:
final result codes to be returned, instead of
the default ERROR final result code.
ERROR is returned normally when error is
related to syntax, invalid parameters, or TA
functionality.
Command Functional Response Control
Group
Command Format Query AT+CMEE=?
Response +CMEE: (0-2)
OK
Write Format AT+CMEE=
Response OK
Read Format AT+CMEE?
Response +CMEE: 0
OK
Execution Format N/A
Response N/A
GSM0107PB001MAN Page 113 of 370 1.08 – 25 January 2007