Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
3.2.11.18. $DISC Disconnect Network Connection
Command Function This command allows the user to initiate a
network disconnect. This command is only
valid for AT$HOSTIF=3 after the local PPP
connection has been established or over-
the-air as an API command when in TCP
PAD mode.
Command Functional Enfora Specific
Group
Command Format Query N/A
Response N/A
Write Format N/A
Response N/A
Read Format N/A
Response N/A
Execution Format AT$DISC
Response OK
Parameter Values N/A
Reference N/A
Standard Scope Optional
Enfora Implementation Scope Full
Notes This command will only disconnect the
network connection when AT$HOSTIF=3.
The local PPP connection will remain
active.
This command can also be used to function
as a disconnect request for TCP PAD. It
must be sent over the air using the UDPAPI
AT Command write sequence
GSM0107PB001MAN Page 319 of 370 1.08 – 25 January 2007