Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.6.2.7. S0 Rings Before Automatic Answer
Command Function Sets the number of rings before
automatically answering a call for GSM and
enables automatic answer to a network
request for PDP activation.
Command Functional Call Control
Group
Command Format Query ATS0=?
Response S0(0-255)
OK
Write Format ATS0=
Response OK
Read Format ATS0?
Response
OK
Execution Format N/A
Response N/A
Parameter Values N/A
Reference ITU-T Ref. V.25ter Chapter 6.3.8
Standard Scope Mandatory
Enfora Implementation Scope Full
Notes ATS0=000 will disable auto answer for
GSM. If AT+CGAUTO is = to 2 or 3
(default), the MT shall attempt to perform a
GPRS attach if it is not already attached,
when the 'S0=n' (n>0) command is
received.
With default settings, if ATS0=(>0) is
sent immediately after power up, an
error will be returned because the MT
will attempt to do an attach before the
AT+CREG state has changed to 1.
GSM0107PB001MAN Page 172 of 370 1.08 – 25 January 2007